COMPANY PROFILE
Modulcasa Line S.p.A. employs staff with 30 years’ experience in the sector and is present in the national, Community and non-European markets.
The Traversetolo – Parma plant occupies an area of approximately 30,000 m2 (of which 7,000 m2 are covered) which allows an annual production capacity of approximately 60 special and prefabricated modular structures and 4,000 standard pieces of monoblocks and containers.
Beyond the mass production of monoblocks, cabins, containers, we are able to study and execute constructions according to the customer’s needs and in compliance with current regulations; in particular, we specialize in the design, production and turnkey installation of prefabricated buildings for schools, offices, community centers, laboratories, shelters, equipped containers, changing rooms for construction sites and for sports fields, sheds and warehouses.
We provide and collaborate with important organizations and companies including: Italian Caritas, National Civil Protection, Autostrade spa, Public Bodies in Italy and abroad (regions, provinces and municipalities), ENEL Power, Terna, Snamprogetti, Impresa Pizzarotti, Rizzani De Eccher, Gruppo Gavio, CMB of Carpi (MO), Astaldi, Danieli Spa, Fondazione Rava etc.
PREFABRICATED BUILDING AND COMPLIANCE WITH THE APPLICABLE LEGISLATION
Prefabricated construction is distinguished, compared to “traditional” construction, by:
- short installation times
- low costs
- greater adaptability to difficult environmental/territorial conditions
- ease of disassembly (in case of temporary structures)
- great functionality and comfort as well as aesthetic care
This makes it particularly suitable for: offices, schools, recreation and community centers, but also for disaster cases or emergency conditions.
RENTAL SERVICE
Our Certifications
ISO 9001: 2015 – ISO 14001:2015
Modulcasa Line has always invested in developing a culture of quality, the environment, and safety.
With this in mind, certifications, their updating and implementation play a primary role.
Since 2000, the company has been certified for the ISO9001 quality management system and since 2005 for the ISO14000 environmental management system.
Being ISO14000 certified means paying particular attention to environmental friendliness, both in the design phase (privileging the use of environmentally friendly materials) and in workshop processing (optimisation of waste sorting, emission controls etc).
ISO 3834-2:2006
In October 2010, the process for ISO 3834-2:2006, Welding Quality Management System, certification was successfully completed.
What is ISO 3834-2:2006?
The UNI EN ISO 3834:2006 standard, “Quality requirements for fusion welding of metallic materials”, is the standard that defines the extended quality requirements for fusion welding of metallic materials both in the workshop and on the construction site
It does not replace, but complements, the UNI EN ISO 9001 series, when the production of the products involves the use of the “Special Structural Welding Process”, in order to ensure that this fundamental phase of the construction chain:
be managed by specially qualified personnel;
that raw materials and supply materials are subjected to internal controls regarding their regulatory compliance;
That the final product, before leaving for the construction site, is subjected to a series of non-destructive tests (non-destructive checks on structural welds)
That the equipment used is subjected to specific checks for proper operation
REGOLAMENTO CE 303/2008 –INSTALLATION OF AIR CONDITIONING SYSTEMS
Certification for installation, maintenance or repair of stationary refrigeration, air conditioning and heat pump equipment.
The implementation of Community Regulation 303/2008 requires that the employees responsible for installing the aforementioned systems possess the so-called “frigorist’s license”; furthermore, the company must be certified by an entity recognized by Accredia.
VIEWCERTIFICATION EN 1090-1: 2009
CE marking, according to Directive 89/106/EEC and European Regulation (EU) No. 305/2011.
All producers of steel and aluminium structures, who are already obligatorily required to comply with the specific requirements laid down for the steel sector for metal carpentry (Steel Processing Centre), will also have to provide, for their products and production plants, for the implementation of the CE Marking according to EN 1090-1.
The CE Marking affixed, shall then indicate compliance with the intended use as specified in the various options of the standard itself.
According to the standard, organizations that manufacture welded structures, or parts thereof, of steel or aluminum, must perform such activities in accordance with the relevant parts of the UNI EN ISO 3834 series standards. The relationship between the execution classes of the structures and the applicable UNI EN ISO 3834 standards is contained within EN 1090-1.
This application will become mandatory from 1 July 2014, Modulcasa Line supported the DNV verification at the end of 2013 obtaining the certificate on 7 January 2014.
STEEL PROCESSING CENTRE
546/900
In April 2011, we obtained certification from the Superior Council of Public Works as a Metal Carpentry Processing Center in accordance with the Ministerial Decree. 14-01-2008 (Technical standards for construction).
What is a Transformation Center?
A processing center is a plant outside the factory and/or construction site, fixed or mobile, that receives basic semi-finished elements from the steel producer and packages structural elements directly usable on the construction site, ready for installation or subsequent processing.
VIEWSOA – Certificate of qualification for the execution of public works
Recently, SOA (Certificate of Qualification for the Execution of Public Works) categories and rankings have been implemented.
OG1 (Civil and Industrial Buildings) class. V (€ 5,165,000)
OG3 (Roads, highways, bridges, viaducts) class. III (€ 1,033,000)
OG11 (Technological systems) class. II (€ 516,000)
OS6 (Finishes of general works,in wooden,plastic, metal and glass materials) class. II (€ 516,000)
OS7(Finishes of general works of a building and technical nature) class. II (€ 516,000)
OS28(Heat and air conditioning systems) class. II (€ 516,000)
OS30(Internal electrical, telephone, radiotelephone and television systems) class. I (€ 258,000)
OS18-A (Structural components of steel or metal) class. VII (€ 15,494,000)
OS32 (Wooden Structures) class. IV-BIS (€ 3,500,000)
Furthermore, the design is qualified up to the VIII ranking.